Combo Gro’chek pH/TDS/Temperature (Low Range) Meter - HI991404 — Combo Gro’chek pH/TDS/Temperature (Low Range) Meter - HI991404 [:lt]Nešiojamas molibdeno fotometras - HI96730[:en]Molybdenum Portable Photometer - HI96730[:] Nešiojamas molibdeno fotometras - HI96730 —

Combo Gro’chek pH/EC/TDS/Temperature (high Range) Meter – HI991405

211.00  + PVM

The HI991405 has been engineered to continuously monitor pH, TDS (0.00 to 10.00 g/L) or EC (0.00 to 20.00 mS/cm) and temperature. 

Produkto kodas: HI991405-02 Kategorija: Žyma:

Neturime

The HI991405 has been engineered to continuously monitor pH, TDS (0.00 to 10.00 g/L) or EC (0.00 to 20.00 mS/cm) and temperature. This microprocessor based meter feature a large, dual level, backlit LCD to give instantaneous readings of pH, EC or TDS and temperature. Optimized for hydroponic and greenhouse applications, the meter housing and cable connections have been sealed against vapor and humidity and all the necessary measuring probes are supplied with purchase.

  • Waterproof
  • Automatic Temperature Compensation (ATC)
  • Large, backlit LCD screens for easy reading

 

Details

The HI991405 is a simple way to measure pH, TDS (0.00 to 10.00 g/L) or EC (0.00 to 20.00 mS/cm) and temperature. Installation is easy; simply hang the meter right above the sample to be tested for continuous measurement, plug the instrument to the mains, immerse the probes and the unit will run without interruption on 12 VDC power supply. The large, dual-display LCD screens show pH, TDS or EC and temperature readings simultaneously. Designed for use in greenhouses and horticultural applications, this meter is waterproof and protected against the ingress of dust and particles.

The meter is supplied with a HI1293D pre-amplified pH electrode with a PEI body and DIN connector. The amplifier for the pH electrode prevents interference from humidity and sources of electrical noise include circulating pumps, motors, and ballasts for grow lights. The polyethylenimine (PEI) protective body protects against most aggressive chemicals as seen in fertilizer solutions with high concentrations of phosphate and nitrate.

The fixed conductivity probe, HI7630 2-pin amperometric features a built-in temperature sensor, 2m (6.6’) cable and protective sleeve to resist most aggressive chemicals.Calibration and temperature compensation are automatic, while the EC/TDS conversion factor and temperature coefficient (β) are user adjustable for application specific measurements. Additionally, both the HI1293D pH electrode and HI7630 conductivity probe have been molded with pipe thread (1/2’’ NPT), which allows the user to attach them to an in-line system.

.

Features at a Glance

Large, dual-level LCD screen

  • Easily see pH, TDS or EC and temperature readings even in low light
  • .

Automatic one-point or two-point calibration

  • Automatically calibrate to 1 or 2 points with auto-buffer recognition
  • .

 

Automatic Temperature Compensation

  • Samples automatically compensated for temperature variations

Adjustable TDS Factor

  • TDS factor adjustable from 0.45 to 1.00 for application specific measurements

 

 

 

pH Range 0.0 to 14.0 pH
pH Resolution 0.1 pH
pH Accuracy ±0.1 pH
pH Calibration Automatic, 1 or 2 point with auto-buffer recognition
EC Range 0.00 to 20.00 mS/cm
EC Resolution 0.01 mS/cm
EC Accuracy ±2% F.S.
EC Calibration automatic, one-point at 12.88 mS/cm or 6.44 g/L (ppt)
TDS Range 0.00 to 10.00 g/L (ppt)
TDS Resolution 0.01 g/L (ppt)
TDS Accuracy ±2% F.S.
EC/TDS Temperature Compensation Automatic, with β adjustable from 0.0 to 2.4%/ºC
EC to TDS Conversion Factor Adjustable from 0.45 to 1.00 (CONV)
Temperature Range 0.0 to 60.0°C / 32.0 to 122.0°F
Temperature Resolution 0.1°C / 0.1°F
pH Electrode HI 1293D pH electrode (included)
EC/TDS Probe HI 7630 conductivity probe (fixed)
Power Supply 12 VDC adapter (included)
Environment 0 to 50ºC (32 to 122ºF); RH max 95% non-condensing
Dimensions 160 x 105 x 31 mm (6.2×4.1×1.2’’)
Weight 190 g (6.7 oz.)
Ordering Information HI991405-02 (Combo Gro’Chek) is supplied with HI1293D pH electrode, HI7630 EC probe (fixed), HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI70030 1288 mS/cm calibration solution sachet, 12 VDC adapter and instructions.

 


Panašūs produktai