[:lt]HI1048Y - pH elektrodas su užsikimšimo prevencijos sistema (CPS™) ir BNC + RCA jungtimi[:en]HI1048Y - pH Electrode with Clogging Prevention System (CPS™) and BNC + RCA Connector[:] — HI1048Y - pH Electrode with Clogging Prevention System (CPS™) and BNC + RCA Connector [:lt]HI98103 Kišeninis pH testeris Checker[:en]HI98103 Pocket Checker pH Tester[:] HI98103 Pocket Checker pH Tester —

HI981304 – pH/EC/TDS Combo Tester

186.00  + PVM

This meter is a waterproof test that offers high accuracy pH, EC/TDS, and temperature measurements in a single tester.
SKU: HI981304 Category:

Available on backorder - This item may take 2-3 weeks to deliver.

HI981304 pH/EC/TDS Combo Tester

There will be no need to keep swapping between meters for your routine measurements with this floating, waterproof combination tester. It has an easy-to-read LCD and automatic shut-off. pH and EC/TDS readings are automatically temperature compensated.

The EC/TDS conversion factor is user-selectable, as well as the temperature compensation coefficient (β).

Features

  • Waterproof – designed to float if accidentally dropped in water
  • Automatic Temperature Compensation – All readings are compensated for variations in temperature and temperature is displayed along with the pH reading.
  • Stability indicator – Meter displays a tag that will disappear when the reading has achieved stability
  • Hold button – Freezes reading on the display to allow recording of measurement
  • BEPS (Battery Error Prevention System) – Meter will automatically shut off if there is not enough power to get an accurate measurement
  • Battery % level at start up
  • Low Battery Indicator
  • Automatic Shut-Off – The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto off feature can be disabled.

High accuracy EC/TDS Graphite Probe

  • The graphite conductivity probe provides greater accuracy because it cannot be contaminated by salt deposits. The exposed temperature sensor provides fast response times and guarantees highly accurate temperature compensated readings.

Replaceable pH electrode cartridge

  • The combo features an easy to replace pH electrode. The sturdy, snap-in connector means there are no pins which could bend or break.

Protective Cap

  • The protective cap features an internal cup that can be filled with storage solution to keep the pH sensor moist.

Calibrate right in the sachets

  • Calibration can be performed directly into the solution sachets.

Supplied complete

  • Supplied with all the tools necessary to start performing tests.

 

Specifications

pH Range   0.00 to 14.00
pH Resolution   0.01 pH
pH Accuracy   ±0.05pH
Conductivity Range   0.00 to 20.00 mS/cm
Conductivity Resolution   0.01 mS/cm
Conductivity Accuracy   ±2% F.S.
TDS Range   0.00 to 10.00 g/L (ppt)
TDS Resolution   0.01 ppt (g/L)
TDS Accuracy   ±2% F.S.
Temperature Range   0.0 to 60.0°C
Temp Resolution   0.1°C
Temp Accuracy   ±0.5°C
Additional specifications    
EC/TDS calibration   Automatic, one point at 12.88 mS/cm or 6.44 ppt (g/L)
pH Calibration   Automatic, one or two point with two sets of standard buffers
Temp compensation   pH automatic; EC/TDS automatic with β adjustable from 0.0 to 2.4%/°C
TDS conversion factor   0.45 to 1.00
pH electrode replacement   HI-73127
Battery life & type   1.5V (4) approx. 300 hours of continuous use; auto off after 8 minutes of non-use
Environment   -5 to 50°C; RH max 100%
Dimensions   163 x 40 x 26mm
Weight   100 g
Ordering information   Supplied with HI-73127 pH electrode, electrode removal tool, protective cap, pH 4.01 buffer solution sachet, pH 7.01 buffer solution sachet, 12888 µS/cm conductivity standard solution sachet, 6.4 ppt TDS standard sachet, pH electrode cleaning solution sachet, electrode storage solution sachet, batteries, and instructions.

 


Related products