Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111-2 — Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111-2 HI700221 Įmontuojamas elektrinio laidumo valdiklis HI700221 Įmontuojamas elektrinio laidumo valdiklis —

Wall Mounted EC Digital Controller HI23211-2

HI2321 is a wall mounted, microprocessor conductivity controller specifically designed to meet your process control requirements.

SKU: HI23211 Category:

HI2321 is a wall mounted, microprocessor conductivity controller specifically designed to meet your process control requirements. This controller provides very accurate measurements due to the four-ring EC probe and Automatic Temperature Compensation (ATC) feature.

  • Fail Safe Alarm System.
  • CAL Check™ alerts users of calibration status.
  • Four-ring method provides an exceptionally stable measurement over a wider range.

     

Details

Fail Safe Alarm System

  • Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller.

Simple Installation

  • HI22111 has mounting holes molded into the housing to assure simple, quick and secure installation without the need for additional hardware.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Good Laboratory Practices (GLP)

  • The GLP feature allows users to store and recall data about system status for ultimate traceability.

Quality Construction

  • Housed in a rugged, modular, fiber-reinforced polypropylene housing that will resist the harmful effects of most chemicals.

Password Protection

  • The Hanna password protection feature keeps these controllers safe from tampering. Only users with the proper password can change the settings of these controllers.
Weight 1.6
EC Range 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
EC Resolution 0.1 µS/cm, 1 µS/cm; 0.01 mS/cm, 0.1 mS/cm
EC Accuracy 0.5% f.s.
EC Calibration automatic, 1 point
EC/TDS Temperature Compensation automatic or manual from -10 to 100°C with Pt100 probe; β adjustable from 0.00 to 10.00%/°C
Temperature Range 10.0 to 100.0°C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.5 °C (0 to 70°C); ±1 °C (outside)

Related products