-
Details
Adjustable Dosing Relay
The BL981411 features a dosing relay which may be configured to dose above or below a user programmable pH setpoint.
Selectable Overdose Protection
The mini controller may be programmed to deactivate a valve, pump, or connected device if its activation continues over a selected time; adjustable from 5 to 30 minutes.
Selectable Control Override
With the flick of a switch, normal “Auto” operation may be overridden turning your connected device “Off” from operation or always “On.”
Fuse Protected Dosing Contacts
The mini controller is protected for up to a 2A load from a connected pump or device.
Easy Peripheral Connection
Quick-connect terminal blocks provide for easy connection to power, communication, dosing control, or sensors.
Matching Pin Connection
An included matching pin option helps protect the sensor from ground loop effects that may lead to erratic readings or system damage.
Front View
Installation cut-out dimensions are provided as well as outside panel dimensions.
Side View
Adjustable location brackets allow the controller to slide easily and securely into place..
-
Range 0.0 to 14.0 pH Resolution 0.1 pH Accuracy (@25°C/77°F) ±0.2 pH Calibration manual, through CAL (offset) trimmer Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 VDC Dosing Selection acid or alkaline
contact open=acid dosage=relay ON if measurement > setpoint
contact closed=alkaline dosage=relay ON if measurement < setpointSetpoint adjustable from 0 to 14 pH Overtime adjustable, typically from 5 to approximately 30 minutes Input Impedance 10¹² Ohm Power Supply BL981411-0: 12 VDC adapter (included);
BL981411-1: 115/230 VAC; 50/60HzDimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) Weight BL981411-0: 200 g (7.1 oz.);
BL981411-1: 300 g (10.6 oz.)Ordering Information BL981411-1 (115/230V) are supplied with mounting brackets, transparent cover and instruction manual.