Name: HALO2 tester for Beer - HI9810312
SKU: HI9810312
Price: 137.50 EUR
Availability: InStock

Accurate and easy to use, HALO2 Wireless pH Tester for Beer is ideal for pH measurement of mash, cooled wort, and beer samples.

0.00 to 12.00 pH range
Titanium body
- The rugged titanium electrode body works as an
  electronic shield protecting against interferences from electrical noise or humidity.
Flat tip electrode
- Allows for direct pH measurement and prevents solids from mash and cooled wart collecting on the surface.
Extractable cloth junction
- To clear any clogging from solids that would result in slow response and unstable readings, simply pull out a small, clean portion of the junction.

Bottom line

HALO2 is a pH electrode with Bluetooth® Smart technology that allows the use of a compatible Apple or Android smart device used as a pH meter. This BT smart technology is energy efficient, allowing for low power consumption to maximize the life of the replaceable battery used in the pH electrode. HALO2 pH probes can be used virtually anywhere: in the field, laboratory, or classroom. With 15 styles of pH electrodes to choose from, matching a HALO2 to your need is easy for a customized testing experience.

Benefits

Turn your smart device into a full-featured pH meter.
Connect to the Hanna Lab App at the press of a button via Bluetooth® wireless technology (10 m range (33’)). Hanna Lab App features data, app information, general HALO information, pH tutorials, and contact information.

Sort and share your data. pH and temperature measurements are updated every second and automatically saved every hour. Measurements can be displayed alone on the display, with tabulated data, or as a graph. Push button on demand highlights your data of interest and data points can be annotated with measurement specific information. Share your data via email in PDF or CSV.

Increase traceability. Ensure that your data can be trusted with Good Laboratory Practice (GLP) information including probe offset and average slope of the last calibration. The Hanna Lab App can also be used to set alarm thresholds and calibration reminders.

Specifications

Range	pH	0.00 to 12.00 pH
	mV	pH/mV conversion
	Temperature	0.0 to 80.0 °C (32.0 to 176.0 °F)
Resolution	pH	0.01 or 0.1 pH
	mV	0.1 or 1 mV
	Temperature	0.1 °C; 0.1 °F
Accuracy	pH	±0.05 pH
Accuracy	Temperature	±0.5 °C; ±0.9 °F
Calibration	Up to three points or four points * Automatic buffer recognition with Standard buffers Hanna (pH 1.68 , 4.01, 7.01, 10.01) or NIST (pH 1.68 , 4.01, 6.86, 9.18)
Temperature compensation	Automatic (ATC) or Manual (MTC)
Electrode	Body material Glass Junction Reference cell Electrolyte Tip / Shape Outer diameter Length	Titanium Low Temperature (LT) Cloth (extractable) Double, Ag/AgCl Gel Flat 12.7 mm (0.5”) 110 mm (4.3”)
Battery type	3V Lithium – CR2032
Battery life	Approximately 1000 hours (500 hours with Bluetooth enabled)
Environment	0 to 50 °C (32 to 122 °F)
Casing	IP65 ingress protection
Dimensions / Weight	51 x 185 x 21 mm (2 x 7.3 x 0.8“) / 60 g (2.1 oz.)

* Available with Hanna Lab App

** Measuring outside the recommended operating temperature range may damage the gel electrolyte and void product warranty.

Note:

The tester can display measurements from –2.00 to 16.00 pH. Measurements outside of the pH range will flash. In this case assess the integrity of the tester and the type of measured sample.