![[:lt]Oro ir skysčio termistoriaus zondas su rankena - HI762L[:en]Air and Liquid Thermistor Probe with Handle - HI762L[:]](https://hannainst.lt/wp-content/uploads/2018/11/hi762l_1.jpg)
![[:lt]ORP Mini kontroleris, intervalas: 0 to 1000 mV, 12VDC[:en]ORP Mini Controller, range: 0 to 1000 mV, 12VDC[:]](https://hannainst.lt/wp-content/uploads/2018/11/redox-mini-regler-12-v-16_1-151dfb272932ef.jpg)
The HI765PWL is a sharp tip penetration thermistor probe with a handle designed for use with a thermistor thermometer. A cable extends 1 m (3.3’) from the handle to the meter connection. The sharp, pointed tip of the probe allows users to obtain highly accurate temperature readings of semi-solid samples. The HI765 series of thermistor probes is pre-calibrated with a maximum error of ±0.2°C (±0.4°F), so recalibration isn’t necessary when probes are interchanged.
Pre-calibrated probe
PTC thermistor
AISI 316 stainless steel
Details
The Sharp Tip Penetration Thermistor Probe with Handle – HI765PWL is designed to measure the temperature of semi-solid samples. The response time of a measurement is affected by the position of the sensor relative to the surface being measured. The HI765PWL sharp, pointed tip construction offers an 8-second response for a temperature reading. With a strong, corrosion-resistant, AISI 316 stainless steel construction, this probe is able to measure samples up to 150°C (302°F).
| Probe Type (sensor) | PTC thermistor |
|---|---|
| Operating Temperature Range | -50 to 150°C (-58 to 302°F) |
| Temperature Probe Accuracy | ±0.2°C (±0.4°F) |
| Response time (90% of final value) | 8 seconds |
| Interchange Error | ±0.2°C (±0.4°F) |
| Probe Material | AISI 316 stainless steel |
| Probe Handle | ABS |
| Cable Length | 1 m (3.3′) |
| Application | semi-solid products |
