![[:lt]Natrio ISE standartinis 0,1 M tirpalas - HI4016-01[:en]Sodium ISE Standard Solution 0.1 M - HI4016-01[:]](https://hannainst.lt/wp-content/uploads/2023/09/HI4016-01-3952x3952-73157d80-1770-47dd-9d3c-230f4453e8ec.jpg)
![[:lt]100 mg/l amoniako standartas, 500 ml - HI4001-02[:en]100 mg/L Ammonia Standard, 500 ml - HI4001-02[:]](https://hannainst.lt/wp-content/uploads/2023/09/100ppm-ammonia-standard.jpg)
Description:
- The HI839150 is a robust 25 vial capacity thermo-reactor for COD determination of industrial wastewater. The reactor has two stored digestion temperature programs that support analysis methods at:
- 150 °C (COD methods, Iron Total, Phosphorus Acid Hydrolyzable, Phosphorus Total methods)
- 105 °C (Chromium and Nitrogen Total methods)
- Laboratory safety shield included
- The included safety shield is highly recommended to use during vial digestion procedure to maintain a safe working environment
- Reactor block temperature continuously evaluated and displayed
- Built-in countdown timer
- A timer of up to 180 minutes is included for applications that require timed digestions. The end of the digestion time is signaled by 5 short acoustic beeps and “DONE” message is displayed. The heating is turned off and the block begins to cool off.
- Status indicator lights
- POWER (on)
- HOT (surface)
- HEATING (in progress)
- Overheating prevention
- Reference temperature probe well
- A small temperature well can accommodate a temperature probe, useful for verifying the heating block.
- Warnings and error messages
- The instrument displays warning messages when erroneous conditions appear and when values are outside the expected range such as high or low temperature, hot surface, or heating system malfunction.
Primary Applications:
Industrial and Municipal Wastewater Treatment
Specifications:
| Temperature range | 20.0 to 160.0°C (68 to 320°F) |
| Set Temperature Programs | 105°C and 150°C |
| Accuracy | ±2°C |
| Temperature stability | ±0.5°C |
| Capacity | 25 vials; Ø 16 mm x 100 mm (Ø 0.63” x 3.94”) Reference temperature probe well |
| Warm-up time | About 10 minutes, depending on selected temperature |
| Digestion time | 1 to 180 minutes |
| Environment | 5 to 50°C (41 to 122°F) |
| Power supply (fuse protected) | 115 Vac (HI839150-01) 230 Vac (HI839150-02) |
| Dimensions | 190 x 300 x 95 mm (7.5 x 11.8 x 3.7”) |
| Weight | Approximately 4.8 kg (10.6 lb.) |
Ordering Information:
HI839150-01 (115 Vac, USA plug) and HI839150-02 (230 Vac, European plug) is supplied with HI740217 laboratory safety shield; power cable; quick reference guide with instructions for manual download; and instrument quality certificate.
